Steel Hinge Belt Conveyors:
Steel Hinge Belt Conveyors are heavy-duty scrap handling and recycling conveyors. They are classified by their pitch, which is the distance (in inches) between the centers of the belts hinge points.
![](https://cardinalconveyor.com/wp-content/uploads/2012/08/2_5_MachineCenterEnduraveyor-300x225.jpg)
From discarding shavings produced by a CNC machine to handling bucket loads of scrap at a recycling facility, these conveyors will get down and dirty to move your product.
Quench, feed, & parts conveyors also available with:
- Steel hinge belt
- Wire mesh belt
- Drag chain
- Cleated belt
- Cleated belt w/sidewall
Light-Duty:![](https://cardinalconveyor.com/wp-content/uploads/2012/08/2-5-FreestandingEnduraveyor-300x199.jpg)
- 2-1/2” Pitch x 4” to 42” wide steel hinge belt
- ½ HP 230/460/3/60 motor – standard
- Formed 12 gauge frame
- 10 to 30 FPM – standard
- Structural Channel Supports
- Liquid Tight Bottom Pan
- Low Profile
- Side Mount Drive – standard (optional top-mount & under-slung)
- Flared infeed side rails
Options & Accessories:
- ¾ & 1 HP motor – TEFC, severe duty, inverter duty, and brake motor
- Variable speed w/DC motor and SCR controller or AC inverter
- Perforated, pimpled and other belt options
- Customized infeed siderails
- Casters
- Coolant tanks, pumps and drain plugs
- Zero speed switches
- Special Curves
- Bulb type infeeds, suppressed frame
Medium-Duty:![](https://cardinalconveyor.com/wp-content/uploads/2012/08/4_PitMountedEnduraveyor-300x225.jpg)
- 4” Pitch x 6” to 60” wide steel hinge belt- ½ HP 230/460/3/60 motor – standard
- Formed
- 10 gauge frame- 30 FPM – standard- Structural Channel Supports
- Liquid Tight Bottom pan
- Meets H.D. automotive & foundry applications
Options & Accessories:
- ¾ to 3 HPmotor – TEFC, severe duty, inverter duty, and brake motor
- Variable speed w/DC motor and SCR controller or AC inverter
- Perforated, pimpled, and other belt options
- Impact rails on infeed frame
- T-slot bearings at infeed
- Customized siderails and infeed hoppers and casters
- Liquid tight bottom pans, bolt on pans
- Coolant tanks, pumps, and drain plugs
- Zero speed switches
Heavy-Duty:
- 6” pitch x 12” to 72” wide steel hinge belt
- ¾ HP 230/460/3/60 motor – standard
- Formed 7 gauge frame
- 30 FPM – standard
- Structural Channel Supports
- Rugged steel for large scrap handling
- Designed for years of maintenance free operation in the most hostile conditions
Options & Accessories:
- 1 to 7-1/2 HP motor 115/230/1/60 & 575/3/60 – TEFC, severe duty, inverter duty, and brake motor
- Variable speed w/DC motor and SCR controller or AC inverter
- Perforated, pimpled and other belt options
- Impact rails on infeed frame
- Customized siderails and infeed hoppers and casters
- Liquid tight bottom pans, bolt-on pans
- Coolant tanks, pumps, and drain plugs
- Zero speed switches
Extra Heavy-Duty:
- 9” Pitch x 12” to 96” in 6” increments wide steel hinge belt
- Drive – sized to load requirements
- 5-50 FPM – standard
- Structural Channel Supports
Click here for more information on Conveyor Electrical Controls and Control Panels.